Skip to content
terra-diamond-turnstile
terra-diamond-turnstile

Frontier Pitts Ltd

Terra Diamond

Category: Doors, Portals, Turnstiles and Locking Hardware

Sub Category: Turnstiles

Standard Tested To: MFES and MTAS V1.0

Terra Diamond

Description

Single full height rectangular turnstile with a semi-cuboid chassis.

Dimensions 1376 mm (width) by 1395 mm (depth) by 2382 mm (height).

The turnstile incorporated a rotor, with four columns of equi-spaced paddles (4 paddles in each column) set at 90 degrees to each other.

The turnstile is described on the following documents available from the manufacturer:

- 6614-126 (Revision 1) - Diamond S turnstile - Overall assembly.

- 6614-128 (Revision 1) - Diamond S turnstile - LH version - Installation details.

- Diamond turnstile - Operating and maintenance manual (V1.2).

The turnstile will achieve the protection levels noted if:

- It is installed in a fence line offering commensurate resistance to forced entry, in accordance with NPSA’s recommendation for installation of this product within a fence line is illustrated below.

- It is configured in the ‘fail locked’ mode in both travel directions.

- Operation of the turnstile is achieved from either side, either:

- Using a suitably rated access control reader, approved by NPSA, mounted to the side to be approached by the operator; or

- A remotely controlled access control system, approved by NPSA, controlled from within the secure area.