Skip to content

Eagle Automation Systems Limited

Wylye Advanced 430 (unique product code 430A-200)

Category: Doors, Portals, Turnstiles and Locking Hardware

Sub Category: Turnstiles

Standard Tested To: MFES v1.0 (External Perimeter) - MTAS V1.0

Wylye Advanced 430 (unique product code 430A-200)

Description

The turnstile incorporated a rotor, with four columns of equi-spaced paddles (6 paddles in each column) set at 90 degrees to each other.

Single full height rectangular turnstile with a cuboid chassis of nominal dimensions 1305 mm (width) by 1330 mm (depth) by 2153 mm (height).

The turnstile incorporated a rotor, with four columns of equi-spaced paddles (6 paddles in each column) set at 90 degrees to each other.

 

The turnstile is described on the following documents available from the manufacturer:

  • 430A-200 (Revision 1) - Wylye Advanced 430 single full height security turnstile.
  • 430A-C1 (Revision 1) - 430 ‘Wylye Advanced’ turnstile electrical control.
  • 430A-900 (Revision 1) - 430A-200 turnstile installation method.

 

The turnstile will achieve the protection levels noted if:

  • It is installed in a fence line offering commensurate resistance to forced entry, in accordance with NPSA’s recommendation for installation of this product within a fence line is illustrated below.
  • It is configured in the ‘fail locked’ mode in both travel directions.
     

Operation of the turnstile is achieved from either side, either:

  • Using a suitably rated access control reader, approved by NPSA, mounted to the side to be approached by the operator; or
  • A remotely controlled access control system, approved by NPSA, controlled from within the secure area.